|
| Redwood (pine) 50 mm kiln-dried |
- Redwood (Pinus Sylvestris) square edged sawn timber (center boards) kiln-dried (humidity 18-20%).
- Invoice dimension: 50 х 100-200 mm, length 3.0 – 6.0 m (gradation 0.3 m or other).
- Sawing dimension: 53 х 105-210 mm, length 3.05 – 6.05 m (gradation 0.3 m or other).
- Thickness and width tolerance: +3/ -0 mm, length tolerances: +100/ -0 mm.
- Quality requirements are according to Russian Standards GOST 26002-83 (grades 1-4) and GOST 8486-86 (grades 0-3).
- Knots intergrown, healthy round and oval, spike and branched (on 1 linear meter): diameter up to 25 mm does not take into account, 3 face knots (up to 35 mm - 2 pieces, up to 50 mm - 1 piece) and 1 edge knot up to 30 mm are supposed. Knots partially intergrown, unsound, rotten and black (on 1 linear meter): diameter up to 10 mm does not take into account, 1 face knot up to 30 mm and 1 edge knot up to 20 mm are supposed.
- Not permitted: blue stain, wane, resin, cracks, rot, bark, insect and mechanical damages.
- Sawn timber is delivered in transport packages which contain boards of one thickness, width and length in one package. The width and height of a transport package are 1.0-1.1 to 1.0-1.1 m. As a rule, half-packages and quarter-packages are supposed.
- Sawn timber boards are stacked on linings through each six - ten rows of boards (or other). Transport packages are established on subbottom boards with 70-75 mm width.
|
|
|
- As a rule, dispatch is performed by motor transport of our constant carriers subject to conditions FCA and EXW (according to „Incoterms-2000") from any settlement of the Central part and Northwest Russian Federation.
- Payment for shipped sawn timber should be manufactured within 5 bank days on the fact of dispatch of each consignment (40-42 cubic meters for KD). In case of deliveries under export contracts, the routine scheme of payment - 70 % on the fact of dispatch, 30 % on the fact of acceptance at the European customers factories and warehouses.
- Quality evaluation of boards can be performed both on saw-mills of supply contractors, and at factories of the European consumers. But, as a rule, acceptance of sawn timber is performed at-sight dispatches EXW or FCA by the experts.
|
